Molecular Hydrogen Research Articles

Molecular dynamics simulation of hydrogen adsorption and diffusion characteristics in graphene pores

Carbon structures have been shown to be potentially efficient hydrogen storage media, but the micro adsorption/diffusion kinetic properties of hydrogen storage are still unclear. We investigated the adsorption of H2 in carbonaceous nanoporous by molecular dynamics simulations. It was found that the hydrogen molecules were completely adsorbed when the pore size was 1 nm, and existed in both adsorbed and free forms when the pore size was 2–6 nm, and the adsorption was in a saturated state, with the absolute adsorption amount keeping constant. Modification of functional groups on the inner side of graphene pores reduces the hydrogen storage capacity, and this effect becomes more and more obvious with decreasing pore size, especially for 1 nm pores. The total adsorption amount of H2 in 1 nm graphene pores was 0.01315 × 10−3 mol/m2, which was 3.8846 times that of graphene oxide pore. The hydrogen adsorption effect on different surfaces is: G > GO(-O-) > GO(-OH) > GO(-O-/OH). The results of this study are helpful to further understand the physical adsorption mechanism of molecular hydrogen on carbonaceous materials.

The Gaseous Hydrogen Transport Capacity in Nanopores Coupling Bulk Flow Mechanisms and Surface Diffusion: Integration of Profession and Innovation

Due to its unique chemical structure, hydrogen energy inherently has a high calorific value without reinforcing global warming, so it is expected to be a promising alternative energy source in the future. In this work, we focus on nanoconfined hydrogen flow performance, a critical issue in terms of geological hydrogen storage. For nanopores where the pore scale is comparable to hydrogen’s molecular size, the impact on hydrogen molecules exerted by the pore surface cannot be neglected, leading to the molecules near the surface gaining mobility and slipping on the surface. Furthermore, hydrogen adsorption takes place in the nanopores, and the way the adsorption molecules move is completely different from the bulk molecules. Hence, the frequently applied Navier–Stokes equation, based on the no-slip boundary condition and overlooking the contribution of the adsorption molecules, fails to precisely predict the hydrogen flow capacity in nanopores. In this paper, hydrogen molecules are classified as bulk molecules and adsorption molecules, and then models for the bulk hydrogen and the adsorption hydrogen are developed separately. In detail, the bulk hydrogen model considers the slip boundary and rarefaction effect characterized by the Knudsen number, while the flow of the adsorption hydrogen is driven by a chemical potential gradient, which is a function of pressure and the essential adsorption capacity. Subsequently, a general model for the hydrogen flow in nanopores is established through weight superposition of the bulk hydrogen flow as well as the adsorption hydrogen, and the key weight coefficients are determined according to the volume proportion of the identified area. The results indicate that (a) the surface diffusion of the adsorption molecules dominates the hydrogen flow capacity inside nanopores with a pore size of less than 5 nm; (b) improving the pressure benefits the bulk hydrogen flow and plays a detrimental role in reducing surface diffusion at a relatively large pressure range; (c) the nanoconfined hydrogen flow conductance with a strong adsorption capacity (PL = 2 MPa) could reach a value ten times greater than that with a weak adsorption capacity (PL = 10 MPa). This research provides a profound framework for exploring hydrogen flow behavior in ultra-tight strata related to adsorption phenomena.

Hydrogen evolution descriptors of 55-atom PtNi nanoclusters and interaction with graphite

Density functional simulations have been performed for Pt n Ni 55−n clusters ( n=0,12,20,28,42,55 ) to investigate their catalytic properties for the hydrogen evolution reaction (HER). Starting from the icosahedral Pt12Ni43 , hydrogen adsorption energetics and electronic d-band descriptors indicate HER activity comparable to that of pure Pt55 (distorted reduced core structure). The PtNi clusters accommodate a large number of adsorbed hydrogen before reaching a saturated coverage, corresponding to 3–4 H atoms per icosahedron facet (in total ∼70–80). The differential adsorption free energies are well within the window of |ΔGH|<0.1 eV which is considered optimal for HER. The electronic descriptors show similarities with the platinum d-band, although the uncovered PtNi clusters are magnetic. Increasing hydrogen coverage suppresses magnetism and depletes electron density, resulting in expansion of the PtNi clusters. For a single H atom, the adsorption free energy varies between −0.32 ( Pt12Ni43 ) and −0.59 eV ( Pt55 ). The most stable adsorption site is Pt–Pt bridge for Pt-rich compositions and a hollow site surrounded by three Ni for Pt-poor compositions. A hydrogen molecule dissociates spontaneously on the Pt-rich clusters. The above HER activity predictions can be extended to PtNi on carbon support as the interaction with a graphite model structure (w/o vacancy defect) results in minor changes in the cluster properties only. The cluster-surface interaction is the strongest for Pt55 due to its large facing facet and associated van der Waals forces.

Persulfidation and phosphorylation of transcription factor SlWRKY6 differentially regulate tomato fruit ripening.

Cysteine desulfhydrase (LCD) catalyzes the generation of the signaling molecule hydrogen sulfide (H2S) in plants. In this study, we found that H2S can inhibit tomato (Solanum lycopersicum) fruit ripening and SlWRKY6 undergoes differential protein persulfidation in SlLCD1-overexpressing leaves. Then, further study indicated that SlWRKY6 could be persulfidated by H2S at Cys396. By construction of slwrky6 mutants and SlWRKY6-OE lines, we found that SlWRKY6 positively regulates leaf senescence and fruit ripening by activating the transcription of ripening-related genes STAYGREEN 1 (SlSGR1) and Senescence-Associated Gene 12 (SlSAG12). In addition, SlWRKY6 interacted with kinase SlMAPK4 and was phosphorylated at Ser33. Dual luciferase transient expression assays and electrophoretic mobility shift assays indicated that SlWRKY6 persulfidation attenuated its transcriptional regulation of target genes SlSGR1 and SlSAG12, whereas SlWRKY6 phosphorylation by SlMAPK4 activated the transcription of target genes to promote fruit ripening. Moreover, we provided evidence that SlWRKY6 persulfidation attenuated its SlMAPK4-mediated phosphorylation to inhibit tomato fruit ripening. By transient expression of SlWRKY6, SlWRKY6C396A, SlWRKY6S33A and SlWRKY6S33D in slwrky6 fruits, we found that SlWRKY6 persulfidation attenuated the expression of SlSGR1 and SlSAG12 thereby delaying tomato fruit ripening, while SlWRKY6 phosphorylation increased the expression of target genes. As tomato fruits ripened, endogenous H2S production decreased, while SlMAPK4 expression increased. Therefore, our findings reveal a model in which SlWRKY6 persulfidation due to higher endogenous H2S levels in un-ripened fruit inhibits its ability to activate SlSGR1 and SlSAG12 expression, while SlWRKY6 phosphorylation by SlMAPK4 activates its transcriptional activity, thereby promoting tomato fruit ripening.

Molecular Hydrogen Acts as a Hydrogen Bond Proton Acceptor: From Protonated Betaine Tagging to the Weakest Hydrogen Bond.

In an attempt to gain further insights into the intermolecular interactions implied by Rizzo's group's cautionary tale related to molecular tagging in infrared multiple photon dissociation (IRMPD) spectroscopy with molecular messengers [Masson, A. . J. Chem. Phys. 2015, 143, 104313], in the present study, we provide an in-depth analysis of the noncovalent interaction between the molecular hydrogen and protonated betaine molecule in the gas phase. We aim to shed some new light on the fundamental issues concerning the wide diapason of hydrogen-bonding-type intermolecular interactions, with a wide variety of proton acceptors. We demonstrate that in the course of tagging the protonated betaine with molecular hydrogen from the OH group side, it is the σ bond of molecular hydrogen that plays the role of hydrogen-bonding proton acceptor. The tagging thus induces a small yet significant red shift of the protonated betaine O-H stretching mode. We investigate the performance of a wide range of density functional theory (DFT) functionals for the calculation of anharmonic vibrational frequency shifts of the studied system, which are essential for the correct interpretation of the experimental IRMPD data. For an accurate prediction of the OH stretching frequency shifts, specifically designed functionals such as Handy's group HCTH/407 should be applied. The empirical dispersion correction enhances the systematic overestimation of the anharmonic frequency shift, characteristic of the most widely used DFT functionals. Combining the full-wave function approach with the charge field perturbation and natural bond orbital (NBO) deletion analyses, we demonstrate that the frequency shift in the OH-tagged structure is governed by the σHH → σ*OH intermolecular charge transfer. This interaction stabilizes the OH-tagged dimer as well, in contrast to the dipole-quadrupole electrostatic interaction energy term. Topological analysis of the electron density reveals the presence of an intermolecular bond critical point with a positive value of the density Laplacian very close to the lower limit for hydrogen bonds. NCI analyses demonstrate that the OH···H2 interaction is weaker than the intramolecular CH···O one within the protonated betaine molecule, with the through of reduced density gradient appearing at less negative sign(λ2)·ρ values. Analyzing the O-H stretching vibrational potential with the second-generation absolutely localized molecular orbitals energy decomposition analysis (ALMO-EDA 2) revealed that in the case of betaineH(+) tagged from the OH group side, the permanent electrostatics (ΔEelec), polarization (ΔEpol), and charge-transfer (ΔEct) contributions to the total intermolecular interaction energy contribute favorably to the weak hydrogen bond formation and to the red shift of the fundamental O-H stretching frequency, the ΔEct contribution being the most significant in the last context. The Pauli repulsion term, on the other hand, favors an O-H stretching frequency blue shift as a consequence of the vibrational confinement effects.

Understanding the cavity Born-Oppenheimer approximation.

Experiments have demonstrated that vibrational strong coupling between molecular vibrations and light modes can significantly change molecular properties, such as ground-state reactivity. Theoretical studies toward the origin of this exciting observation can roughly be divided into two categories, with studies based on Hamiltonians that simply couple a molecule to a cavity mode via its ground-state dipole moment on the one hand, and on the other hand ab initio calculations that self-consistently include the effect of the cavity mode on the electronic ground state within the cavity Born-Oppenheimer (CBO) approximation; these approaches are not equivalent. The CBO approach is more rigorous, but unfortunately it requires the rewriting of electronic-structure code, and its results may sometimes be hard to physically interpret. In this work, we exploit the relation between the two approaches and demonstrate on a real molecule (hydrogen fluoride) that for realistic coupling strengths, we can recover CBO energies and spectra to high accuracy using only out-of-cavity quantities from standard electronic-structure calculations. In doing so, we discover what thephysical effects underlying the CBO results are. Our methodology can aid in incorporating more possibly important features in models, play a pivotal role in demystifying CBO results, and provide a practical and efficient alternative to full CBO calculations.

Simulation of a catalytic deoxygenation reaction of fatty acids to produce biohydrocarbons and evaluation of the influence of reaction parameters on the conversion and selectivity of products

Nowadays, there has been an urgency in the search for sustainable energy sources, such as those derived from biomass. This search is not only limited to minimizing greenhouse gas emissions but is also related to the increasing scarcity of fossil fuels. This work aims to investigate and analyze the production of bio-hydrocarbons from fatty acids through the simulation of the deoxygenation reaction by the DWSim software. In this simulation, a continuous catalytic deoxygenation reactor of the stirred tank with fluidized bed type was selected, aiming to understand the influence of operating parameters on this reaction. The parameters evaluated were temperature, pressure, hydrogen feed, and catalyst mass. For this simulation, hydrogen and stearic acid were chosen as feedstocks, focusing on the heptadecane and octadecane production. The rate law was chosen based on an extensive literature review, as well as reaction conditions. The kinetic model used as a reference was based on reactions of stearic acid and hydrogen in the presence of NiMo/Al2O3 as a catalyst. A stearic acid feed of 2.4 x 104 m3 year-1 was used as a base, representing the average feed of fatty raw material practiced in biodiesel plants located in the state of Minas Gerais, Brazil. From the variation of these parameters for a sensitivity analysis, with conversion as the key response, the following optimal operating conditions were defined: temperature of 650 K, pressure of 50 bar, molecular hydrogen feed of 4.1 x 10-3 m³ s-1, and catalyst mass of 8 kg. Under these new circumstances, the conversion of stearic acid reached a value of 99.23 %. The simulation of this reaction allowed us to understand the effect of the main reaction parameters on the reaction products, proved to be an important and robust tool to be used in projects and feasibility analyses of plants and biorefineries.

Geometric Algebra Jordan–Wigner Transformation for Quantum Simulation

Quantum simulation qubit models of electronic Hamiltonians rely on specific transformations in order to take into account the fermionic permutation properties of electrons. These transformations (principally the Jordan–Wigner transformation (JWT) and the Bravyi–Kitaev transformation) correspond in a quantum circuit to the introduction of a supplementary circuit level. In order to include the fermionic properties in a more straightforward way in quantum computations, we propose to use methods issued from Geometric Algebra (GA), which, due to its commutation properties, are well adapted for fermionic systems. First, we apply the Witt basis method in GA to reformulate the JWT in this framework and use this formulation to express various quantum gates. We then rewrite the general one and two-electron Hamiltonian and use it for building a quantum simulation circuit for the Hydrogen molecule. Finally, the quantum Ising Hamiltonian, widely used in quantum simulation, is reformulated in this framework.

Tandem hydrogenation/hydrogenolysis of furfural to 2-methylfuran over multifunctional metallic Cu nanoparticles supported ZIF-8 catalyst

Catalytic transfer hydrogenation (CTH), that employs protic solvents as hydrogen sources to alleviate the use of molecular hydrogen H2, has gained great attention. This work, reports multifunctional, metallic Cu nanoparticles supported ZIF-8 material for CTH of furfural to a highly valued fuel additive, 2-methylfuran (2-MF) using 2-propanol. Of all as-synthesized xCu(yM)/ZIF-8 catalysts with varied NaBH4 concentration (yM) and Cu loading (x), 11Cu(1.5 M)/ZIF-8 exhibited higher catalytic activity with > 99 % FAL conversion and 93.9 % 2-MF selectivity. This is ascribed to its high specific surface area, and existence of optimum amount of Lewis acid-base sites along with Cu0 species, which are responsible for hydrogenation of furfural to furfuryl alcohol and subsequent hydrogenolysis to produce 2-MF. The present work reports a highly efficient and stable, metal-MOF hybrid material for CTH of FAL to 2-MF, which is one among the best reports available in literature, therewith suggests a promising approach for bio-oil upgradation.

Improving NiFe Electrocatalysts through Fluorination-Driven Rearrangements for Neutral Water Electrolysis.

Neutral electrolysis to produce hydrogen is prime challenging owing to the sluggish kinetics of water dissociation for the electrochemical reduction of water to molecular hydrogen. An ion-enriched electrode/electrolyte interface for electrocatalytic reactions can efficiently obtain a stable electrolysis system. Herein, we found that interfacial accumulated fluoride ions and the anchored Pt single atoms/nanoparticles in catalysts can improve hydrogen evolution reaction (HER) activity of NiFe-based hydroxide catalysts, prolonging the operating stability at high current density in neutral conditions. NiFe hydroxide electrode obtains an outstanding performance of 1000mA cm-2 at low overpotential of 218mV with 1000 h operation at 100mA cm-2. Electrochemical experiments and theoretical calculations have demonstrated that the interfacial fluoride contributes to promote the adsorption of Pt to proton for sustaining a large current density at low potential, while the Pt single atoms/nanoparticles provide H adsorption sites. The synergy effect of F and Pt species promotes the formation of Pt─H and F─H bonds, which accelerate the adsorption and dissociation process of H2O and promote the HER reaction with a long-term durability in neutral conditions.

Meta-optimization of resources on quantum computers

The current state of quantum computing is commonly described as the Noisy Intermediate-Scale Quantum era. Available computers contain a few dozens of qubits and can perform a few dozens of operations before the inevitable noise erases all information encoded in the calculation. Even if the technology advances fast within the next years, any use of quantum computers will be limited to short and simple tasks, serving as subroutines of more complex classical procedures. Even for these applications the resource efficiency, measured in the number of quantum computer runs, will be a key parameter. Here we suggest a general meta-optimization procedure for hybrid quantum-classical algorithms that allows finding the optimal approach with limited quantum resources. This method optimizes the usage of resources of an existing method by testing its capabilities and setting the optimal resource utilization. We demonstrate this procedure on a specific example of variational quantum algorithm used to find the ground state energy of a hydrogen molecule.

Mixing is easy: New insights for cosmochemical evolution from pre-stellar core collapse

Signposts of early planet formation are ubiquitous in substructured young discs. Dense, hot, and high-pressure regions that formed during the gravitational collapse process, integral to star formation, facilitate dynamical mixing of dust within the protostellar disc. This provides an incentive to constrain the role of gas and dust interaction and resolve potential zones of dust concentration during star and disc formation stages. We explore whether the thermal and dynamical conditions that developed during protostellar disc formation can generate gas flows that efficiently mix and transport the well-coupled gas and dust components. We simulated the collapse of dusty molecular cloud cores with the hydrodynamics code PLUTO augmented with radiation transport and self-gravity. We used a two-dimensional axisymmetric geometry and followed the azimuthal component of the velocity. The dust was treated as Lagrangian particles that are subject to drag from the gas, whose motion is computed on a Eulerian grid. We considered 1, 10, and 100 micron-sized neutral, spherical dust grains. Importantly, the equation of state accurately includes molecular hydrogen dissociation. We focus on molecular cloud core masses of 1 and 3 $M_ odot $ and explore the effects of different initial rotation rates and cloud core sizes. Our study underlines mechanisms for the early transport of dust from the inner hot disc regions via the occurrence of two transient gas motions, namely meridional flow and outflow. The vortical flow fosters dynamical mixing and retention of dust, while the thermal pressure driven outflow replenishes dust in the outer disc. Notably, these phenomena occur regardless of the initial cloud core mass, size, and rotation rate. Young dynamical precursors to planet-forming discs exhibit regions with complex hydrodynamical gas features and high-temperature structures. These can play a crucial role in concentrating dust for subsequent growth into protoplanets. Dust transport, especially, from sub-au scales surrounding the protostar to the outer relatively cooler parts, offers an efficient pathway for thermal reprocessing during pre-stellar core collapse.

Growing a nuclear star cluster from star formation and cluster mergers: The JWST NIRSpec view of NGC 4654

We present a detailed study of the centre of NGC\,4654, a Milky Way-like spiral galaxy in the Virgo cluster that has been reported to host a double stellar nucleus, thus promising a rare view of ongoing star cluster infall into a galaxy nucleus. Analysing JWST NIRSpec integral-field spectroscopic data in combination with Hubble Space Telescope Wide Field Camera 3 imaging of the inner 330 times 330 pc, we find that the NGC\,4645 nucleus is in fact more complex than previously thought, harbouring three massive star clusters within 32 pc of the centre. Maps of infrared emission lines in the NIRSpec spectra show different morphologies for the ionised and molecular gas components. The emission from molecular hydrogen gas is concentrated at the nuclear star cluster (NSC) location, while emission from hydrogen recombination lines is more extended beyond the central cluster. The velocity fields of both gas and stars indicate that the three clusters are part of a complicated dynamical system, with the NSC having an elevated velocity dispersion in line with its high stellar mass. To investigate the stellar populations of the three clusters in more detail, we used surface brightness modelling to measure their fluxes from UV to mid-infrared wavelengths. This information, together with spectroscopically derived extinction values, are then used to fit the spectral energy distributions (SEDs) of the clusters. Two of the clusters are UV-bright and well described by single stellar populations with young ages (sim 3 and 5 Myr) and relatively low masses ($M_ M_ and $M_ M_ respectively), whereas the central cluster is much more massive ($M_ 10^7 M_ and cannot be fitted by a single stellar population. Instead, we find that the presence of a minor young population (sim 1\,Myr, $M_ M_ embedded in a dominant old population (sim 8\,Gyr) is required to explain its SED. Given its complex composition and the close proximity of two young star clusters that are likely to merge with it within a few hundred million years, we consider the nucleus of NGC\,4654 a unique laboratory to study NSC growth from both in situ star formation and the infall of star clusters.

Enhanced hydrogen storage of single-layer blue phosphorus by synergistic effect between doped lightweight elements and grafted lithium atoms

Single-layer blue phosphorus (SLBP) has displayed charming photoelectric performances, but its property in hydrogen storage is not outstanding due to the weak interactions. To expand the application of SLBP in hydrogen storage, we attempt to screen SLBP-based materials with stable structures and strong polarity using density functional theory by doping lightweight elements and grafting alkali metal atoms. The simulation results indicate that the lightweight elements (B, C, N, O and F) doped SLBP systems have more stable structures due to the strong orbital interaction than pure SLBP, and exhibit electron deficient characteristics. Compared to the pure SLBP, the H2 adsorption energies of the doped systems improve and range from 0.05 to 0.09 eV, but it still cannot meet the requirements of ideal hydrogen storage. Therefore, the lightweight element doped SLBP systems are further grafted by Li atom. Under the synergistic effect of doping lightweight elements and grafting Li atoms, H2 molecules are strongly polarized, and the corresponding adsorption energies of H2 reach to 0.16, 0.26, 0.28, 0.30, and 0.10 eV, respectively. It is worth emphasizing in the C-doped SLBP system that the hydrogen storage capacity of reaches 5.53 wt% for each Li atom adsorbs one hydrogen molecule and the corresponding adsorption energy is 0.23 eV/H2 when the ratio of C to P atoms increases to 6:26. For each Li atom adsorbs two hydrogen molecules in the same hydrogen storage system, the hydrogen storage capacity reaches 10.48 wt% with 0.18 eV/H2 adsorption energy. We hope these results can provide theoretical basis and scientific guidance for searching for SLBP-based materials with excellent hydrogen storage performances at ambient temperature.

The delayed senescence in harvested blueberry by hydrogen-based irrigation is functionally linked to metabolic reprogramming and antioxidant machinery

Molecular hydrogen is beneficial for fruits quality improvement. However, the mechanism involved, especially cellular metabolic responses, has not been well established. Here, the integrated widely targeted metabolomics analysis (UPLC-MS/MS) and biochemical evidence revealed that hydrogen-based irrigation could orchestrate, either directly or indirectly, an array of physiological responses in blueberry (Vaccinium spp.) during harvesting stage, especially for the delayed senescence in harvested stage (4 °C for 12 d). The hubs to these changes are wide-ranging metabolic reprogramming and antioxidant machinery. A total of 1208 distinct annotated metabolites were identified, and the characterization of differential accumulated metabolites (DAMs) revealed that the reprogramming, particularly, involves phenolic acids and flavonoids accumulation. These changes were positively matched with the transcriptional profiles of representative genes for their synthesis during the growth stage. Together, our findings open a new window for development of hydrogen-based agriculture that increases the shelf-life of fruits in a smart and sustainable manner.

Intestine‐Targeted Controlled Hydrogen‐Releasing MgH2 Microcapsules for Improving the Mitochondrial Metabolism of Inflammatory Bowel Disease

AbstractThe development of efficient therapeutic agents with low side effects for inflammatory bowel disease management is a longstanding challenge. Recently, hydrogen molecule (H2) is identified as an emerging spectrum‐wide, effective, and biosafe anti‐inflammatory agent, but intestine‐targeted H2 delivery is still challenging. Here, an intestine‐targeted controlled hydrogen‐releasing microcapsule (MgH2@EC@ES) is developed by confining abundant MgH2 microparticles in the hydrophobic network of ethyl cellulose (EC) before being encapsulated with Eudragit S100 (ES) by a multistep microemulsion method. The pH‐responsive swelling feature of ES enables MgH2@EC@ES microcapsules to escape from the stomach after oral administration and to hydrolytically produce a high amount of H2 in the intestinal tract in a sustained way. High‐dose oral administration of MgH2@EC@ES microcapsules exhibits a high outcome of colitis prevention, which is comparable to the first‐line drug 5‐aminosalicylic acid (5‐ASA) in the changes of body/spleen weights and disease activity and even better in the recovery of colon length and the improvement of histopathological change in the colon than 5‐ASA in a colitis mouse model. Mechanically, it is innovatively revealed that H2 released from MgH2@EC@ES microcapsules protects the complexes in the mitochondrial electron transfer chain from oxidative damage to enhance the energy metabolism of intestinal cells in support of mucosal restoration in colitis.

Development of the Time-Independent Methods for the Cl + H2/F + HD Reaction Using Hyper-Spherical Coordinates Including (Full) Spin-Orbit Characteristics.

Recently, a combined study of high-resolution molecular crossed beam experiment and accurate full-dimensional time-dependent theory, including full spin-orbit characteristics on the effect of electronic spin and orbital angular momenta in the F + HD reaction, was reported by some of us, focusing on the partial wave resonance phenomenon (Science 2021, 371, 936-940). It revealed that the time-dependent theory could explain all of the details observed in the high-resolution experiment. Here, we develop two time-independent close-coupling methods using hyperspherical coordinates, including the two-state model, where only a part of the spin-orbit characteristics is considered, and the six-state model, where the full spin-orbit characteristics is considered. With these two newly developed theoretical models and the adiabatic theoretical model, the detailed reaction dynamics of the F + HD (v = 0, j = 0) reaction and the Cl + H2 (v = 0, j = 0) reaction are investigated and compared. Some of the results are compared with the time-dependent quantum wave packet theory and the experimental observations, and good agreements have been obtained, which suggests the validity of the pure-procession approximation in the six-state model using different theoretical methods. This work demonstrates the ability of the reactive scattering theory including full spin-orbit characteristics for describing the reactions of a halogen atom plus hydrogen molecule and its isotopologues.

On the molecular mechanisms of / uptake in confined ionic liquids: A computational study

Classical molecular dynamics and hybrid grand canonical Monte Carlo/molecular dynamics simulations were combined to analyse the gas uptake mechanism of hydrogen and nitrogen molecules inside carbon nanotubes filled with an ionic liquid. Several nanotube diameters (from 6 Å to 12.24 Å) and two different ionic liquids (ethylammonium nitrate and 1-ethyl-3-methylimidazolium tetrafluoroborate) were considered to study their effect on the gas capture capacity and on the location of gas molecules within the nanotubes. The simulations showed that nitrogen absorption ability is, in general, greater than that of hydrogen, with the aprotic ionic liquid being more efficient for gas confinement. In addition, gas capture was observed to increase from a scarce 0.4% in bulk ionic liquids up to 8%-25% inside small nanotubes, and the maximum gas uptake was observed for those nanotubes that allow for a greater degree of conformational freedom of the ionic liquid. However, our calculations show that, whereas hydrogen storage is mainly governed by the amount of accessible free volume, for understanding that of nitrogen solvation energetics must be also considered. In all cases, gas molecules are absorbed in the ionic liquid-rich-region, but the interactions with the other components of the system favour their accommodation closer to the carbon wall than to the nanotube center. Finally, single-particle dynamics of gas molecules was analyzed by means of the velocity autocorrelation functions and the vibrational density of states, which show a blue-shifting when increasing the radius of the nanotube.

Enhanced hydrogen adsorption-desorption reversibility found on NiAl alloy: A first-principles study

Improving the hydrogen storage performance of carbon-based materials via transition metals incorporation has been proved experimentally, where control over the hydrogen adsorption kinetics and hydrogen surface diffusion is the key. In this work, we proved theoretically via density functional theory (DFT) how such incorporation promotes better hydrogen storage performance in Ni-based materials supported on graphene, in which static and dynamic behavior of the system were modeled by plane-wave DFT and ab initio molecular dynamics (AIMD), respectively. In addition, the hydrogen storage materials Ni10Al3 and Ni13 supported on graphene, denoted as Ni10Al3/GP and Ni13/GP, are modeled to realize the experimental observation on Ni3Al alloy under high hydrogen pressure. It was found that the Ni10Al3/GP alloy system exhibited better properties in twofold: (1) increased hydrogen adsorption capacity through providing an additional site for H2 molecular adsorption, particularly on the Al atoms, and (2) enhanced hydrogen desorption at ambient conditions observed from reversible H2 adsorption at all coverages with barrierless migration energy. Therefore, the proof from the DFT point-of-view provides valuable insight into exploring other metal alloy systems that can provide additional sites for molecular hydrogen adsorption and improve hydrogen adsorbate mobility.

Modeling Molecular Hydrogen in Low-metallicity Galaxies

We use a suite of hydrodynamics simulations of the interstellar medium (ISM) within a galactic disk, which includes radiative transfer, a nonequilibrium model of molecular hydrogen, and a realistic model for star formation and feedback, to study the structure of the ISM and H2 abundance as a function of local ISM properties. We show that the star formation rate and structure of the ISM are sensitive to the metallicity of the gas with a progressively smoother density distribution with decreasing metallicity. In addition to the well-known trend of the H I–H 2 transition shifting to higher densities with decreasing metallicity, the maximum achieved molecular fraction in the ISM drops drastically at Z ≲ 0.2 Z ⊙ as the formation time of H2 becomes much longer than a typical lifetime of dense regions of the ISM. We present accurate fitting formulae for both volumetric and projected fH2 measured on different scales as a function of gas metallicity, UV radiation field, and gas density. We show that when the formulae are applied to the patches in the simulated galaxy, the overall molecular gas mass is reproduced to better than a factor of ≲1.5 across the entire range of metallicities and scales. We also show that the presented fit is considerably more accurate than any of the previous fH2 models and fitting formulae in the low-metallicity regime. The fit can thus be used for modeling molecular gas in low-resolution simulations and semi-analytic models of galaxy formation in the dwarf and high-redshift regimes.